Original
By certification 
HP-CAS(E)-436 Cold Applied Splices(Economic)
Application:
The cold applied splice(Economic) product line is designed at a single component in-line splice to provide high environmental
protection to seal the termination from moisture and provide electrical isolation. If moisture is present,it can lead to insulation
failure and breakdown of the electrical connection.
Characteristics:
One-step termination and environmental protection
No heating required for installation — safe for use on fueled aircraft
Reliable in a wide variety of environmental conditions
Easy installation and application flexibility
Prevents water ingress under permanent pressure/weight
Temperature range:-55˚C to 125˚C
Dielectric strength: 2,500 V Maximum
Technical Data:
Property |
Specification Requirements |
Test Methods |
Typical Value |
Tensile strength(Room temp.) |
Min. 16Mpa |
ISO37 |
18.5Mpa |
Elongation at break (Room temp.) |
Min. 200% |
ISO37 |
450% |
Tensile strength after aging(158℃/168hrs) |
Min.11.5Mpa |
ISO37 |
15Mpa |
Elongation after aging(158℃/168hrs) |
Min.100% |
ISO37 |
220% |
Voltage withstand(Un-aged) |
Wifhstand 2.5 KV for 1minute and breakdown |
UL224 |
Pass |
Voltage withstand (Aged) |
Withstand 2.5 KV for 1minute and breakdown |
UL224 |
Pass |
Copper corrosion(158℃/168 hrs) |
No corrosion of bare copper |
UL224 |
No sign of deg |
Copper stability(158℃/168 hrs) |
No sign of degradation Min. Elongation 100% |
UL224 |
Pass |
Cold bend(-30℃/1hrs) |
No crack |
ISO6722 |
Pass |
Maximum secant modulus(2%) |
250Mpa |
ASTMD882 |
Pass |
Volume resistivity |
Min. 1014Ω-cm |
ASTMD2671 |
Pass |
Heat shock(250℃/4 hrs) |
No crack |
ASTMD2671 |
Pass |
Size：
Part No |
Color |
L±1.0 (mm) |
øA±0.5 (mm) |
øB±0.25 (mm) |
øC±0.5 (mm) |
E±0.25 (mm) |
HP-CAS(E)-436-01 |
Red |
36 |
4.8 |
4.5 |
4.7 |
15 |
HP-CAS(E)-436-02 |
Blue |
36 |
5.8 |
5.5 |
5.7 |
15 |
HP-CAS(E)-436-03 |
Yellow |
40 |
6.8 |
6.5 |
6.8 |
15 |
